PUBLICATIONS

Showing 166 publications

2025

Mechanisms of spall failure in niobium subjected to high throughput laser-driven micro-flyer impact, Acta Materialia, https://doi.org/10.1016/j.actamat.2025.121079 della Ventura, N.M., Zare, A., Diamond, J.M., Purstl, J.T., Mignerot, F., Sharma, A., Silverstein, R., Holmes, M. Spicer, J.B., Hufnael, T.C., Begley, M.R., Strachan, A., Ramesh, K.T., Gianola, D.S. (2025)
Predicting multi-nodal in-nozzle particle interactions in high-viscosity fluid mediums for acoustophoretic direct-ink writing of line-patterned composites, Additive Manufacturing, 104778. Armstrong, E.N., Johnson, K.E., Herbruger, K.A., Sanchez, A.K., Begley, M.R. and Cobb, C.L. (2025)
Minimizing finite viscosity enhances relative kinetic energy absorption in bistable mechanical metamaterials but only at sufficiently fine discretization, Journal of the Mechanics and Physics of Solids, in press. Xiu, H., Fancher, R. Frankel, I., Ziemke, P., Fermen-Coker, M., Begley, M., and Boechler, N. (2025)
Geometry assisted phase selection (GAPS): interplay of phase heterogeneity and geometry in gyroid shell metamaterials printed with 17-4 PH stainless steel, Advanced Engineering Materials, in press. Puerstl, J.T., et al. (2025)
The impacts of thermoelastic anisotropy and grain boundary misorientation on microcracking in ceramics, Journal of the Mechanics and Physics of Solids, 106024. Ericks, A.R., Zok, F.W., Gianola, D.S. and Begley, M.R. (2025)
Large recoverable elastic energy in chiral metamaterials via twist-buckling, Nature, in press. Fang, X., Yu, D., Wen, J., Dai, Y., Begley, M.R., Gao, H., Gumbsch, P. (2025)
Using direct electron detection for EBSD of low symmetry & beam sensitive ceramic materials, Ultramicroscopy, 268, 114079. della-Ventura, N.M., Ericks, A.R., Echlin, M.P., Moore, K., De Graef, M., Pollock, T.M. Begley, M.R., Zok, F.W., Gianola, D.S. (2025)
Non-destructive evaluation of bulk metallic glass components using resonant spectroscopy, Applied Materials Today, 42, 102529. Kube, S.A., Bordeenithikasem, P., Ziemke, P., Lamb, J., Rossin, J., Torbet, C., Begley, M.R., Dillon, P.R., Pollock, T.M. (2025)

2024

Influence of BN microstructure on oxidation of SiC/BN/SiC Composites, Journal of the American Ceramic Society, 108, e20230, https://doi.org/10.1111/jace.20230. Christensen, V.L., Gavalda-Diaz, O., Skillet, R., Prentice, C., Begley, M.R. and Zok, F. (2024)
Modeling stress evolution during fiber oxidation, Mechanics of Materials, 201, 105225. Duan, I., Christensen, V.L., Begley, M.R., Zok, F.W. (2024)
The defect sensitivity of brittle truss-based metamaterials, Materials & Design, 239, 112776. Ziemke, P., Finney, O., Chambers, R.G., Thiraux, R., Valdevit, L., Begley, M.R. (2024)
Design of non-linear viscoelastic architected foams, Materials & Design, 243, 113003. Begley, M.R., Ziemke, P., Chambers, R.G., Echlin, M.L.P., Mackin, T.J. (2024)
Heterogeneity in millimeter-scale Ti-6Al-4V lattice primitives: challenges in defining effective properties for metamaterial design, Materials & Design, 238, 112695. della Ventura, N.M., Dong, C.Q., Messina, S.A., Collino, R.R., Balbus, G.H., Donegan, S.P., Miller, J.D., Gianola, D.S., Begley, M.R. (2024)
Microstructural control of a multi-phase PH steel printed with laser powder bed fusion, Advanced Materials Technologies, 9, 2301037. Fields, B., Amiri, M., Lim, J., Purstl, J.T., Begley, M.R., Apelian, D., Valdevit, V. (2024)

2023

Two-dimensional patterning of mesoscale fibers using acoustophoresis, Materials & Design, 234, 112328. Johnson, K. E., Montano, B. C., Kailino, J. N., Armstrong, E. N., Cobb, C. L., & Begley, M. R. (2023)
Advances and opportunities in high through-put small-scale mechanical testing, Current Opinion in Solid State and Material Science, 27, 4, 101090. Gianola, D.S., della Ventura, N.M., Balbus, G.H., Ziemke, P., Echlin, M.P. and Begley, M.R. (2023)
A simple, validated approach for the design of two-dimensional particle patterns via acoustophoresis, Materials & Design, 232, 112165. Johnson, K.E., Melchert, D.S., Armstrong, E.N., Cobb, C.L. and Begley, M.R. (2023)
Design rules for addressing material asymmetry induced by templated epitaxy for integrated heteroepitaxial on-chip light sources, Advanced Functional Materials, 33, 2304645. Shang, C., Hughes, E.T., Begley, M.R., Koscica, R., Fouchier, M. Feng, K., He, W., Wan, Y., Leake, G., Ludewig, P. and Bowers, J.E. (2023)
Resisting subsidence with a truss implant: application of the 'snowshoe' principle for interbody fusion devices, Journal of Biomechanics, 155, 111635. Kiapour, Al., Massad, E., Kodigudla, M.K., Kelkar, M.S., Begley, M.R., Goel, V.K., Block, J.E., Shin, J.H. (2023)
Oxide growth and stress evolution underneath cracked environmental barrier coatings, Journal of the Mechanics and Physics of Solids, 175, 105275. Sehr, S., Collier, V., Zok, F. and Begley, M.R. (2023)
An integrated analysis of transport, oxidation, and creep during oxidation of interior pores in SiC, Journal of the American Ceramic Society, 106, 3736-3748. Sehr, S., Collier, V., Zok, F. and Begley, M.R. (2023)

2022

A bi-material lattice concept for tailoring compressive properties, Materials & Design, 224, 111265. Ruschel, A.L., Samuel, A.F., Martinez, M.C., Begley, M.R., and Zok, F.W. (2022)
Failure mechanisms in model thermal and environmental barrier coating systems, Journal of the European Ceramic Society, 42, 5129-5144. Deijkers, J.A., Begley, M.R. and Wadley, H.N.G. (2022)
Anisotropic thermally conductive composites enabled by acoustophoresis and stereolithography, Advanced Functional Materials, 32, 2201687. Melchert, D.S. Tahmasebipour, A., Liu, X., Mancini, J., Moran, B., Giera, B., Joshipura, I.D., Shusteff, M., Meinhart, C.D., Cobb, C.L., Spadaccini, C., Gianola, D.S. and Begley, M.R. (2022)
Fracture-based transient thermo-mechanical analysis of reciprocating engine thermal barrier coatings, Engineering Fracture Mechanics, 270, 108568. Koutsakis, G., Begley, M.R., Hutchinson, J.W. and Ghandhi, J.B. (2022)
Acoustophoresis of a resonant elastic microparticle in a viscous fluid medium, The Journal of the Acoustical Society of America, 151, 3083-3093. Tahmasebipour, A., Begley, M.R. and Meinhart, C. (2022)
Engineered jumpers overcome biological limits via work multiplication, Nature, 604, 657-661. Hawkes, E.W., Xiao, C., Peloquin, R.-A., Keeley, C., Begley, M.R., Pope, M.T., Niemeyer, G. (2022)
Crack propagation in low dislocation density quantum dot lasers epitaxially grown on silicon, Applied Physics Letters Materials, 10, 011114. Shang, C., Begley, M.R., Gianola, D.S., Bowers, J.E. (2022)
Recession of BN coatings in SiC/SiC compositions through reaction with water vapor, Journal of the American Ceramic Society, 105, 498-511. Collier, V.E., Xu, W., McMeeking, R.W., Zok, F.W., Begley, M.R. (2022)

2021

The mechanical response of additively manufactured IN625 thin-walled structures, Scripta Materialia, 205, 114188. Banerjee, A., Messina, S., Begley, M.R., Schwalback, E.J., Groeber, M.A., Musinski, W.D., Shade, P.A., Cox, M.E., Miller, J.D., Hemker, K.J. (2021)
Coating recession effects in ceramic composite strength, Journal of the Mechanics and Physics of Solids, 156, 104608. Zok, F.W., Collier, V.E., Begley, M.R. (2021)
Recent progress in acoustic field-assisted 3D-printing of functional composite materials, MRS Advances, 6, 636-643. Johnson, K., Melchert, D., Gianola, D.S., Begley, M.R., Ray, T.R. (2021)
Architected implant designs for long bones: advantages of minimal surface-based topologies, Materials & Design, 207, 109838. Hsieh, M.T., Begley, M.R., and Valdevit, L. (2021)
Truss implant technology for interbody fusion in spinal degenerative disorders: profile of advanced structural design, mechanobiologic and performance characteristics, Expert review of medical devices, 18, 707-715. Hunt, J.P., Begley, M.R. and Block, J.E. (2021)
Modeling meso- and microstructure in materials patterned with acoustic focusing, Materials & Design, 202, 109512. Melchert, D.S., Johnson, K., Giera, B., Fong, E.J., Shusteff, M., Mancini, J., Karnes, J.J., Cobb, C.L., Spadaccini, C. Gianola, D.S. and Begley, M.R. (2021)

2020

Damping in cellular structures made from composite struts and walls with viscoelastic phases, Journal of the Mechanics and Physics of Solids, 145, 104106. Wehmeyer, S.J., Pro, W.J., Compton, B.N., Zok, F. and Begley, M.R. (2020)
Toward optimal acoustophoretic manipulation by exploiting asymmetry, Journal of the Acoustical Society of America, 148, 359-373. Tahmasebipour, A., Friedrich, L., Begley, M., Bruus, H. and Meinhart, C. (2020)
A computational modeling framework for reaction and failure of environmental barrier coatings under silicate deposits, Journal of the American Ceramic Society, 103, 5196-5213. Summers, W., Poerschke, D., Begley, M., Levi, C., and Zok, F. (2020)
Changes in filament microstructures during direct ink writing with yield stress fluid support, Applied Polymer Materials, 2, 2528-2540. Friedrich, L. and Begley, M.R. (2020)
Corner accuracy in direct ink writing with support material, Bioprinting, 19, e00086. Friedrich, L. and Begley, M.R. (2020)
Printing direction dependent microstructures in direct ink writing, Additive Manufacturing, 34, 101192 (17 pages). Friedrich, L. and Begley, M.R. (2020)
Subsidence in 3D-printed cages on foam substrates, Journal of Biomechanical Engineering, 142, 091003 (8 pages). Collino, R., Kiapour, A. and Begley, M. (2020)

2019

Flexible conductive composites with programmed electrical anisotropy using acoustophoresis, Advanced Materials Technology, 19(4), 19000586. Melchert, D.S., Collino, R.C., Ray, T.R., Dolinski, N.D., Begley, M.R. and Gianola, D.S. (2019)
Post-buckling and dynamic response of angled struts in elastic lattices, Journal of the Mechanics and Physics of Solids, 133, 103693. Wehmeyer, S, Zok, F.W., Eberl, C., Gumbsch, P, Cohen, N., McMeeking, R.M. and Begley, M.R. (2019)
Transition from penetration cracking to spallation in environmental barrier coatings on ceramic composites, Surface Coatings and Technology, 378, 125083. Summers, W.D., Begley, M.R. and Zok, F.W. (2019)
A model for high temperature deformation of nanolaminate Cu-Nb composites, Materials Science and Engineering, A761, 138016. Avallone, J.T., Nizolek, T.J., Pollock, T.M. and Begley, M.R. (2019)
Bridging functional nanocomposites to robust macroscale devices, Science, 364, eaav4299. Begley, M.R., Gianola, D.S. and Ray, T.R. (2019)
Elastoplastic design of beam structures subjected to cyclic thermomechanical loadings, Thin-Walled Structures, 136, 175-185. Cinoglu, I.S., Begley, M.R., Deaton, J.D., Beran, P.S., McMeeking, R.M. and Vermaak, N. (2019)
Modeling the non-linear response of elastic lattice materials, Mechanics of Materials, 129, 159-168. Cohen, N., Begley, M.R., and McMeeking, R.M. (2019)
Interface delamination vs. bulk cracking along wavy interfaces, Engineering Fracture Mechanics, 206 64-74. Sehr, S. and Begley, M.R. (2019)
Defect sensitivity of truss strength, Journal of the Mechanics and Physics of Solids, 124 489-504. Latture, R., Begley, M.R. and Zok, F.W. (2019)

2018

Conditions controlling kink crack nucleation out of, and delamination along, an interface crack, Journal of the Mechanics and Physics of Solids, 121, 480-495. Pro, J.W., Sehr, S., Lim, R.K., Petzold, L.R., Begley, M.R. (2018)
In situ characterization of low viscosity direct-write ink writing: stability, wetting and rotational flows, Journal of Colloid and Interface Science, 529, 599-609. Friedrich, L.M. and Begley, M.R. (2018)
Scaling relationships for acoustic control of two-phase microstructures during direct-write printing, Materials Research Letters, 6(3), 191-198. Collino, R.R., Ray, T.R., Friedrich, L.M., Cornell, J.D., Meinhart, C.D. and Begley, M.R. (2018)
Design and mechanical properties of elastically-isotropic trusses, Journal of Materials Research, 33(3), 249-263. Latture, R., Begley, M.R. and Zok, F.W. (2018)

2017

Acoustic control of microstructures during direct ink writing of two phase materials, Sensors and Actuators A: Physical, 268, 213-221. Friedrich, L., Collino, R.R., Ray, T.R. and Begley, M.R. (2017)
Strain fields induced by kink band propagation in Cu-Nb laminates, Acta Materialia, 133, 303-315. Nizolek, T.J., Begley, M.R., McCabe, R.J., Avallone, J.T., Mara, N.M., Beyerlein, I.J. and Pollock, T.M. (2017)
Response of molten silicate infiltrated Gd2Zr2O7 thermal barrier coatings to temperature gradients, Acta Materialia, 132, 538-549. Jackson, R.W., Zaleski, E.M., Hazel, B.T., Begley, M.R. and Levi, C. (2017)

2016

Inkjet printing on transparency films for reagent storage with polyester-toner microdevices, Analytical Methods, 8, 7061-7068. Krauss, S.T., Remcho, T.P., Monazami, E., Thompson, E.L., Reinke, P., Begley, M.R. and Landers, J.P. (2016)
Periodic truss structures, Journal of the Mechanics and Physics of Solids, 96, 184-203. Latture, R., Begley, M.R. and Zok, F.W. (2016)
Deposition of ordered two-phase materials using microfluidic print nozzles with acoustic focusing, Extreme Mechanics Letters, 8, 96-106. Collino, R.R., Ray, T.R., Fleming, R.C., Cornell, J.D., Compton, B.G. and Begley, M.R. (2016)
Numerical simulation of the edge stress singularity and the adhesion strength for compliant mushroom fibrils adhered to rigid substrates, International Journal of Solids and Structures, 85, 160-171. Ramgopal, B., Begley, M.R., Fleck, N.A. and McMeeking, R.M. (2016)
Response of ytterbium disilicate-silicon environmental barrier coatings to thermal cycling in water vapor, Acta Materialia, 103, 1-14. Richards, B.T., Sehr, S., de Franqueville, F., Begley, M.R. and Wadley, H.N.G. (2016)
Thermal expansion behavior of new Co-based alloys and implications for coatings, Surface Coatings and Technology, 289, 61-68. Jackson, R.W., Titus, M.S., Begley, M.R. and Pollock, T.M. (2016)
Multi-lever fluidic flow control for rapid protein quantitation in a rotationally-driven microdevice (RDM) fabricated in polyethylene terephthalate using laser print and cut, Lab on a Chip, 16, 377-387. Ouyang, Y., Li, J., Phaneuf, C., Riehl, P.S., Forest, C., Begley, M.R., Haverstick, D.M. and Landers, J.P. (2016)
Fracture mechanisms of ytterbium monosilicate environmental barrier coatings during cyclic thermal exposure, Acta Materialia, 103, 448-460. Richards, B.T., de Franqueville, F., Sehr, S., Begley, M.R. and Wadley, H.N.G. (2016)
High-performance simulation of fracture in idealized 'brick and mortar' composites using adaptive Monte Carlo minimization on the GPU, International Journal of High Performance Computing, 30, 186-199. Lim, R.K., Pro, W.J., Utz, M., Begley, M.R. and Petzold, L. (2016)

2015

Acoustic field controlled patterning and assembly of anisotropic particles, Extreme Mechanics Letters, 5 37-46. Collino, R.R., Ray, T.R., Fleming, R.C., Sasaki, C.H., Haj-hariri, H. and Begley, M.R. (2015)
The impact of stochastic microstructures on the macroscopic fracture properties of brick and mortar composites, Extreme Mechanics Letters, 5, 1-9. Pro, J.W., Lim, R.K., Petzold, L.R., Utz, M. and Begley, M.R. (2015)
Elastodynamic plane strain mode I crack tip stress and displacement fields in a generalized linear neo-Hookean elastomer, Journal of the Mechanics and Physics of Solids, 84, 21-38. Begley, M.R., Creton, C. and McMeeking, R.M. (2015)
Mechanisms of Ytterbium Monosilicate-Mullite-Silicon coating failure during thermal cycling in water vapor, Journal of the American Ceramic Society, 98, 4066-4075. Richards, B.T., Begley, M.R. and Wadley, H.N.G. (2015)
A concept for mitigating head injury under translational blunt impact, International Journal of Crashworthiness, 20, 483-494. Nazarian, O., Begley, M.R., Zok, F.W. (2015)
GPU-based simulations of fracture in idealized brick-and-mortar composites, Journal of the Mechanics and Physics of Solids, 80, 68-85. Pro, J.W., Lim, R. K., Petzold, L.R., Utz, M., Begley, M.R. (2015)
Interaction of molten silicates with thermal barrier coatings under temperature gradients, Acta Materialia, 89, 396-407. Jackson, R.W., Zaleski, E.M., Poerschke, D.L., Hazel, B.T., Begley, M.R. and Levi, C.G. (2015)
Simultaneous metering and dispensing of multiple reagents on a passively controlled microdevice solely by finger pressing, Lab on a Chip, 15, 867-876. Xu, K., Begley, M.R. and Landers, J.P. (2015)
Dynamic response of thin films on substrates subjected to femtosecond laser pulses, Acta Materialia, 84, 136-144. Jorgensen, D.J., Begley, M.R. and Pollock, T.M. (2015)

2014

Stochastic virtual tests for high-temperature ceramic matrix composites, Annual Reviews in Materials Research, 44, 479-529. Cox, B.N., Bale, H.A., Begley, M., Blacklock, M., Do, B.-C., Fast, T., Naderi, M., Novak, M., Rajan, V.P., Rinaldi, R.G., Ritchie, R.O., Rossol, M.N., Shaw, J.H., Sudre, O., Yang, Q., Zok, F.W. and Marshall, D.B. (2014)
Peeling of an elastic membrane tape adhered to a substrate by a uniform cohesive traction, International Journal of Solids and Structures, 51, 3003-3011, http://dx.doi.org/10.1016/j.ijsolstr.2014.04.001 Gialamas, P., Volker, B., Collino, R.R., Begley, M.R. and McMeeking, R.M. (2014)
Detachment of compliant films adhered to stiff substrates via Van der Waals interactions, Proceedings of the Royal Society: Interface, 11, 20140453. Collino, R.R., Philips, N.R., Rossol, M.N., McMeeking, R.M. and Begley, M.R. (2014)
Critical cooling rates to avoid transient-driven cracking in thermal barrier coating (TBC) systems, International Journal of Solids and Structures, 51, 1364-1374. Jackson, R. W. and Begley, M.R. (2014)
Optimal material properties for mitigating brain injury during head impact, Journal of Applied Mechanics, 81, 031014-(1-5). Begley, M.R. and Zok, F.W. (2014)
Comprehensive solutions for the response of freestanding beams with tensile stress subjected to point loading, Journal of Applied Mechanics, 81, 031008-(1-7). Gaskins, J.T., Barker, N.S. and Begley, M.R. (2014)

2013

Flow switching in microfluidic networks using passive features and frequency tuning, Lab on a Chip, 13, 3668-3674. Collino, R.C., Reilly-Shapiro, N., Foresman, B., Xu, K. Utz, M., Landers, J.P. and Begley, M.R. (2013)
Rapid and direct patterning of 'tunable' hydrophobic valves on disposable microchips by laser printer lithography, Lab on a Chip, 13, 1762-1771. Ouyang, Y., Wang, S., Li, J., Riehl, P., Begley, M.R. and Landers, J.P. (2013)
Failure mechanism maps for tiled systems, Thin Solid Films, 531, 332-339. Begley, M.R., Zok, F.W. and Vermaak, N. (2013)
Measurement of brittle film toughness and discovery of toughening mechanism in TBCs with segmented microstructure, Materials Science and Engineering A, 564, 324-330. Donahue, E.M, Philips, N.R., Begley, M.R. and Levi, C. (2013)
The buckling and post-buckling behavior of fibrils attached to a rigid surface, Journal of Applied Mechanics, 80 041022-(1-11) Stark, S., Begley, M.R. and McMeeking, R.M. (2013)

2012

Ink-jet printing of high strength alumina microbeams, Journal of the American Ceramic Society Communications, 95, 3016-3018. Philips, N.R., Compton, B. and Begley, M.R. (2012)
Peeling of a tape with frictional sliding and large deformations, Journal of the Mechanics and Physics of Solids, 61, 1265-1279. Begley, M.R., Collino, R.C., Israelachvili, J.N. and McMeeking, R.M. (2012)
Inductively coupled microfluidic pressure sensor for in vivo monitoring of cerebrospinal shunt function, Journal of Medical Engineering and Technology, 36, 156-162. Song, S.-H., Gillies, G.T., Begley, M.R., Utz, M. and Broaddus, W.C. (2012)
Micromechanical models to guide the development of brick and mortar composites, Journal of the Mechanics and Physics of Solids, 60, 1545-1560. Begley, M.R., Compton, B.G., Philips, N.R., Utz, M., Ritchie, R.O., Wilbrink, D.V. and Begley, M.R. (2012)
A new detection modality for label-free quantification of DNA in biological samples via superparamagnetic bead aggregation, Journal of the American Chemical Society, 134, 5689-5696. Leslie, D., Li, Jingyi, Strachan, B., Begley, M., Finkler, D., Bazydlo, L, Barker, N., Haverstick, D., Utz, M. and Landers, J.P. (2012)
Delamination resistance of thermal barrier coatings containing embedded ductile layers, Acta Materialia, 60, 2497-2508. Begley, M.R. and Wadley, H.N.G. (2012)
Generating virtual textile composite specimens using statistical data from micro-computed tomography: 3D tow representations, Journal of the Mechanics and Physics of Solids, 60, 1561-1581. Blacklock, M., Bale, H., Begley, M.R. and Cox, B.N. (2012)
Generating virtual textile composite specimens using statistical data from micro-computed tomography: 1D tow representations for the Binary Model, Journal of the Mechanics and Physics of Solids, 60, 451-470. Blacklock, M., Bale, H., Begley, M.R. and Cox, B.N. (2012)
Microfluidic waves, Lab on a Chip, 11, 3846-3854. Utz, M., Begley, M.R. and Haj-Hariri, H. (2012)
Characterizing three-dimensional textile ceramic composites using synchrotron x-ray computed tomography, Journal of the American Ceramic Society, 95, 392-402. Bale, H., Blacklock, M., Begley, M.R., Marshall, D.B., Cox, B.N. and Ritchie, R.O. (2012)
Evolutionary optimization of the material properties of a tropical seed, Proceedings of the Royal Society: Interface, 9, 34-42. Lucas, P.W., Gaskins, J.T., Lowrey, T.K., Harrison, M.E., Morrogh-Bernard, H.C., Cheyne, S.M. and Begley, M.R. (2012)

2011

Reaction, transformation and delamination of samarium zirconate thermal barrier coatings, Surface & Coatings Technology, 205, 4355-4365. Zhao, H., Begley, M.R., Heuer, A., Sharghi-Moshtaghin, R. and Wadley, H.N.G. (2011)
Solid phase extraction of DNA from biological samples in a post-based, high surface area poly(methyl methacrylate) (PMMA) microdevice, Lab on a Chip, 11, 1603-1611. Reedy, C.R., Price, C.W., Sniegowski, J., Ferrance, J.P., Begley, M.R. and Landers, J.P. (2011)
Delamination of ceramic coatings with embedded metal layers, Journal of the American Ceramic Society, 94, S96-S103. Begley, M.R. and Wadley, H.N.G. (2011)

2010

Scaling of strength and ductility in bio-inspired brick and mortar composites, Applied Physics Letters, 97, 193701. Wilbrink, D.V., Utz, M., Ritchie, R.O. and Begley, M.R. (2010)
Surface diffusion and dissolution kinetics in the electrolyte-metal interface, Journal of the Electrochemical Society, 157, C328-337. Policastro, S.A., Carnahan, J.C., Zangari, G., Bart-Smith, H., Seker, E., Begley, M.R., Reed, M.L., Reynolds, P.F. and Kelly, R.G. (2010)
Electrodeposition of metastable Au-Ni alloys, Journal of the Electrochemical Society, 157, D396-D405. Rouya, E., Stafford, G.R., Bertocci, U., Mallet, J.J., Schad, R., Begley, M.R., Kelly, R.G., Reed, M.L. and Zangari, G. (2010)
Molecular interactions on surface-assembled monolayers of short double-stranded DNA, Langmuir, 26, 11574-11580. Huang, L., Seker, E., Landers, J.P., Begley, M.R. and Utz, M. (2010)
Fabrication of nanoporous gold multiple electrode arrays for neural electrophysiology studies, Nanotechnology, 21, 125504. Seker, E., Berdichevsky, Y., Begley, M.R., Reed, M.L., Staley, K.J. and Yarmush, M.L. (2010)
PDMS/glass interface adhesion energy determined via comprehensive solutions for thin film blister tests, Journal of Applied Mechanics, 77, 031007. Sofla, A., Seker, E., Landers, J.P. and Begley, M.R. (2010)

2009

Nanoporous gold: fabrication, characterization and applications, Materials, 2, 2188-2215. Seker, E., Reed, M.L. and Begley, M.R. (2009)
Fracture of nanoscale copper films on elastomer substrates, Applied Physics Letters, 95, 231914. Begley, M.R., Scott, O.N., Utz, M. and Bart-Smith, H. (2009)
Periodic response of fluidic networks with passive deformable features, Applied Physics Letters, 95, 203501. Begley, M.R., Utz, M., Bart-Smith, H., Haj-hariri, H., Leslie, D.C. and Landers, J.P. (2009)
Formation of silicon nanoporous structures induced by colloidal gold nanoparticles, Chemistry of Materials, 21, 2721-2726. Zhu, J.Z., Bart-Smith, H., Begley, M.R., Zangari, G. and Reed, M.L. (2009)
Non-linear pressure flow relationships for passive microfluidic valves, Lab on a Chip, 9, 2691-2697. Seker, E., Leslie, D.L., Haj-Hariri, H., and Begley, M.R. (2009)
Frequency-specific flow control in microfluidic circuits with passive elastomer features, Nature Physics, 5, 231-235. (*corresponding authors). Leslie, D.C., Easley, C.J., Seker, E., Karlinsey, J.M., Utz, M., Begley*, M.R. and Landers*, J.P. (2009)
A thermal treatment approach to reduce the formation of microvoids in blanket nano-porous gold films, Scripta Materialia, 60, 435-438. Seker, E., Reed, M.L. and Begley, M.R. (2009)

2008

The role of macroscopic hardening and individual length-scales on crack tip stress elevation from phenomenological strain gradient plasticity, Journal of the Mechanics and Physics of Solids, 56, 3527-3540. Komaragiri, U., Agnew, S.R., Gangloff, R.P. and Begley, M.R. (2008)
Flexible and conductive bilayer membranes of nano-porous gold and silicone: synthesis and characterization, Applied Physics Letters, 92, 154101. Seker, E., Reed, M.L., Utz, M. and Begley, M.R. (2008)
Kinetics of capillary wetting in nano-porous films in the presence of surface evaporation, Applied Physics Letters, 92, 12138. Seker, E., Begley, M.R., Reed, M.L., and Utz, M. and (2008)
The effects of annealing prior to dealloying on the mechanical properties of freestanding nanoporous gold microbeams, Acta Materialia, 56, 324-332. Seker, E., Gaskins, J.T., Zhong, J., Bart-Smith, H., Reed, M.L., Kelly, R., Zangari, G. and Begley, M.R. (2008)
Scaling theory of adsorption-induced stresses in polymer brushes grafted onto compliant substrates, Journal of the Mechanics and Physics of Solids, 56, 801-814. Utz, M. and Begley, M.R. (2008)
Multiscale modeling of adsorbed molecules on freestanding microfabricated structures, Journal of Applied Mechanics, 75, 021008 (8 pgs). Begley, M.R. and Utz, M. (2008)

2007

The effects of post-fabrication annealing on the mechanical properties of freestanding nanoporous gold structures, Acta Materialia, 55, 4593-4602. Seker, E., Gaskins, J.T., Zhong, J., Bart-Smith, H., Reed, M.L., Kelly, R., Zangari, G. and Begley, M.R. (2007)
Analysis and design of kinked (bent) beam sensors, Journal of Micromechanics and Microengineering, 17, 350-357. Begley, M.R. and Barker, N.S. (2007)
On the use of dynamic excitation to release stiction-failed microcantilevers, Journal of Microelectromechanical Systems, 16, 163-173. Savkar, A., Murphy, K.D., Lesseman, C., Mackin, T.J. and Begley, M.R. (2007)
Shear lag based Iwan model for frictional contacts, European Journal of Mechanics A, 26, 212-224. Deshmukh, D.V., Berger, E.J., Begley, M.R. and Komaragiri, U. (2007)

2006

Effects of aging on scale-dependent plasticity in aluminum alloys and implications for crack growth, Materials Science and Engineering A, 435-436, 333-342. Ro, Y., Begley, M.R., Gangloff, R.P and Agnew, S.P. (2006)
Mitigation of tensile failure in microfabricated nano-porous gold beams, Applied Physics Letters, 89, 133104. Seker, E., Zhong, J., Bart-Smith, H., Begley, M.R., Zangari, G., Kelly, R. and Reed, M.L. (2006)
Mechanical properties of dehydrated photoresists for use in RF-MEMS applications, Journal of Micromechanics and Microengineering, 16, 2086-2091. Stanec, J.S., Begley, M.R. and Barker, N.S. (2006)

2005

The impact of material selection and geometry on multi-functional bilayer sensors and actuators, Journal of Micromechanics and Microengineering, 15, 2379-2388. Begley, M.R. (2005)
The electro-mechanical response of elastomer membranes coated with ultra-thin metal electrodes, Journal of the Mechanics and Physics of Solids, 53, 2557-2578. Begley, M.R., Scott, O.N., Bart-Smith, H., Jones, M.H. and Reed, M.L. (2005)
Chemo-mechanical interactions between adsorbed groups and thin elastic films, Journal of the Mechanics and Physics of Solids, 53, 2119-2140. Begley, M.R., Utz, M., and Komaragiri, U. (2005)
The electro-mechanical response of highly compliant substrates and thin stiff films with periodic cracks, International Journal of Solids and Structures, 42, 5259-5273. Begley, M.R. and Bart-Smith, H. (2005)
The mechanical response of freestanding circular elastic films under point and pressure loads, Journal of Applied Mechanics, 72, 203-212. Komaragiri, U., Begley, M.R. and Simmonds, J.G. (2005)

2004

Nano-mechanical testing of circular freestanding polymer films with sub-micron thickness, Acta Materialia, 52, 5451-5460. Maner, K.C., Begley, M.R. and Oliver, W. C. (2004)
Indentation of freestanding circular elastomer films using spherical indenters, Acta Materialia, 52, 4877-4885. Scott, O.N., Begley, M.R. , Komaragiri, U. and Mackin, T.J. (2004)
Spherical indentation of freestanding circular thin films in the membrane regime, Journal of the Mechanics and Physics of Solids, 52, 2005-2023. Begley, M.R. and Mackin, T.J. (2004)
Fatigue testing of polymer membranes, Polymer Composites, 25, 442-450. Vernon, P.J., Mackin, T.J. and Begley, M.R. (2004)

2003

Interfacial debonding around rectangular features in multi-layer structures, Special Issue on the Mechanics of Interfaces, Interface Science, 11, 319-327. Begley, M.R. and Begley, C.J. (2003)
Adhesion of micro-cantilevers subjected to mechanical point-loading: modeling and experiments, Journal of the Mechanics and Physics of Solids, 51, 1601-1622. Jones, E.E., Begley, M.R. and Murphy, K.D. (2003)
Mechanical measurements of adhesion in micro-cantilevers: transitions in geometry and cyclic energy changes, Special Issue on Nano- and Microscale Experiments, Experimental Mechanics, 43, 280-288. Jones, E.E., Murphy, K.D. and Begley, M.R. (2003)
Channel cracking during thermal cycling of thin film multi-layers, Special Issue on Nanoscale Films, International Journal of Fracture, 119(4), 325-338. Begley, M.R. and Ambrico, J.M. (2003)
The role of flaw geometry in thin film delamination from two-dimensional interface flaws located along free edges, Engineering Fracture Mechanics, 70, 1721-1736. Ambrico, J.M. and Begley, M.R. (2003)

2002

The role of initial flaw size and plasticity in adjacent layers in channeling crack growth in thin films, Thin Solid Films, 419, 144-153. Ambrico, J.M. and Begley, M.R. (2002)
Cracking in thin multilayers with finite-width and periodic architectures, International Journal of Solids and Structures, 39, 1443-1462. Ambrico, J.M., Jones, E.E. and Begley, M.R. (2002)

2001

Delamination of thin films from corner and two-dimensional edge flaws, International Journal of Fracture, 112, 205-222. Begley, M.R. and Ambrico, J.M. (2001)
Stress and shape evolution of irregularities in oxide films on elastic-plastic substrates due to thermal cycling and film growth, Acta Materialia, 49, 1577-1588. Ambrico, J.M., Begley, M.R. and Jordan, E.H. (2001)
Progressive cracking of a multi-layer system upon thermal cycling, Journal of Applied Mechanics, 68, 513-520. Begley, M.R. and Evans, A.G. (2001)
In-plane fracture resistance of a cross-ply fibrous monolith, Journal of the American Ceramic Society, 84[2], 367-375. McNulty, J.C., Zok, F.W. and Begley, M.R. (2001)
The role of macroscopic plasticity in fretting fatigue life prediction, International Journal of Fatigue, 23(2), 121-128. Ambrico, J.M. and Begley, M.R. (2001)

2000

Structural dynamic effects on interface response-formulation and simulation under partial slipping conditions, Journal of Applied Mechanics, 67, 785-792. Berger, E.J., Begley, M.R. and Mahajani, M. (2000)
Plasticity in fretting contact, Journal of the Mechanics and Physics of Solids, 48 (11), 2391-2417. Ambrico, J.M. and Begley, M.R. (2000)
Analysis of a wedge impression test for measuring the interface toughness between films/coatings and ductile substrates, Acta Materialia, 48, 3211-3220. Begley, M.R., Mumm, D.R. Evans, A.G. and Hutchinson, J.W. (2000)

1999

Plasticity in fretting of coated substrates, Engineering Fracture Mechanics, 62, 145. Begley, M.R. and Hutchinson, (1999)
Spherical impression of thin elastic films on elastic-plastic substrates, International Journal of Solids and Structures, 36, 2773. Begley, M.R., Evans, A.G. and Hutchinson, J.W. (1999)

1998

The mechanics of size-dependent indentation, Journal of the Mechanics and Physics of Solids, 46, 2049. Begley, M.R. and Hutchinson, J.W., (1998)
Time dependent crack initiation and growth in ceramic matrix composites, ASME Journal of Gas Turbines and Power, 120, 808. Begley, M.R., Cox, B.N. and McMeeking, R.M. (1998)

1997

Inelastic deformation of fiber composites containing bridged cracks, Mechanics of Materials, 26, 81. Zok, F.W., Begley, M.R., Steyer, T. and Walls, D.P. (1997)
Creep crack growth with small-scale bridging in ceramic matrix composites, Acta Metallurgica et Materialia, 43, 3927. Begley, M.R., McMeeking, R.M. and Cox, B.N. (1997)
Time dependent behavior of bridged cracks in CMCs: crack growth initiation, International Journal of Solids and Structures, 34, 1035. Begley, M.R. (1997)

1996

Matrix cracking in ceramic matrix composites with creeping fibers, in IUTAM Symposium on Nonlinear Analysis of Fracture, ed. J.R. Willis, Kluwer Series on Solid Mechanics and its Applications, series ed. G.M. Gladwell (Kluwer Academic, Dordrecht, 1997) pg. 353. Cox, B.N., Marshall, D.B., McMeeking, M.R. and Begley, M.R. (1996)

1995

Creep rupture in ceramic matrix composites with creeping fibers, Journal of the Mechanics and Physics of Solids, 43, 727. Begley, M.R., Evans, A.G. and McMeeking, R.M. (1995)
Time dependent crack growth in ceramic matrix composites with creeping fibers, Acta Metallurgica et Materialia, 43, 3927. Begley, M.R., Cox, B.N. and McMeeking, R.M. (1995)
Fatigue crack growth with fiber failure in metal matrix composites, Composites Science and Technology, 53, 365. Begley, M.R. and McMeeking, R.M. (1995)
Numerical analysis of fiber bridging and fatigue crack growth in metal matrix composite materials, Materials Science and Engineering A, A200, 12-21. Begley, M.R. and McMeeking, R.M. (1995)